Place of Origin:
China
Brand Name:
SINTEK
Model Number:
STK-KM400A
Document:
The Fully Automatic Irregular Copper Strip Punching Machine is engineered for high-volume production of custom-shaped copper foil and thin metal strip components. Featuring precision servo feeding, touchscreen PLC control, automatic scrap removal and finished-product stacking, it delivers efficient and repeatable manufacturing of electrical conductive parts.
Unlike conventional straight strip cutting equipment, this automatic punching machine uses customized stamping dies to produce irregular copper components according to customer drawings. It is particularly suited to manufacturing Z-shaped, offset and other specially designed copper strip profiles used in electrical connector production.
The equipment integrates automatic material feeding, precision punching, waste separation, finished-part stacking and conveyor transportation into a coordinated production process. This reduces repetitive manual handling and supports consistent production in industrial manufacturing environments.
The machine uses servo-controlled material feeding to position copper strips precisely before each punching cycle. The coordinated feeding system supports accurate material positioning and repeatable punching operations, helping manufacturers maintain consistent component dimensions during batch production.
The equipment uses dedicated metal stamping dies to produce irregular copper strip shapes. Punching dies can be designed according to component drawings, allowing manufacturers to process different product geometries within the machine's specified capacity. Typical components include offset copper strips, Z-shaped conductive pieces and customized connector blanks.
The specified punching speed is 80–100 strokes per minute under suitable operating conditions. This makes the machine a practical option for repetitive production, particularly for orders involving thousands of identical components. Actual finished-part output depends on die design, material properties and the number of parts produced per stroke.
The machine incorporates an automatic scrap removal function to separate waste material from finished components. This helps reduce manual sorting requirements and supports a more organized punching process.
Finished parts are automatically stacked during production. When the preset production quantity is reached, the completed batch is transferred forward through the conveyor system. This feature supports batch counting, finished-product collection and preparation for subsequent manufacturing operations.
The machine combines a touchscreen interface with PLC control and a multi-servo drive configuration. Operators can manage production settings through the control interface, while the control system coordinates feeding, punching and material transfer.
| Equipment Type | Automatic Irregular Copper Strip Punching Machine |
|---|---|
| Punching Area | 400 × 200 mm |
| Material Thickness | 0.1–0.2 mm |
| Punching Speed | 80–100 strokes/min |
| Punching Accuracy | According to Approved Customer Drawings |
| Material Feeding | Servo-Controlled Automatic Feeding |
| Punching Method | Custom Metal Stamping Dies |
| Control System | Touchscreen + PLC |
| Drive Configuration | Four Inverter Systems and Full Servo Control |
| Scrap Removal | Automatic |
| Product Stacking | Automatic |
| Finished-Part Transfer | Automatic Conveyor |
| Coil Inner Diameter | 76 mm |
| Maximum Material Load | 50 kg |
| Rated Power | 3.5 kW |
| Power Supply | 380 V |
| Machine Weight | Approximately 800 kg |
| Machine Dimensions | 2,000 × 800 × 1,300 mm |
Processing capacity depends on material properties, tooling design and product dimensions. Punching accuracy should be confirmed against the approved component drawings and production samples.
The machine can produce custom-shaped copper strip blanks used in electrical connector assemblies. These components may be further processed through bending, welding, fastening or other manufacturing operations.
Irregular copper strip components are used in selected electrical connection and power distribution assemblies. Automatic punching allows manufacturers to prepare repeatable conductive parts according to approved electrical equipment designs.
The equipment can prepare specially shaped thin copper components for flexible electrical connection assemblies. Finished-part suitability depends on the conductor design and subsequent joining requirements.
Custom copper components are used in certain battery connection and energy storage assemblies. The machine can support the preparation of thin conductive parts where the specified material, geometry and production requirements are compatible.
Customized copper strip components can be used in selected transformer connections, industrial electrical assemblies and conductive hardware. The punching process supports repeatable preparation of components for downstream assembly.
This coordinated workflow reduces manual intervention between punching and finished-part handling.
Can the machine produce customized copper strip shapes?
Yes. Customized punching dies can be designed according to customer drawings and the machine's processing capacity.
What material thickness can the machine process?
The specified material thickness range is 0.1–0.2 mm, depending on material properties.
Does the machine support automatic finished-product collection?
Yes. It includes automatic stacking and conveyor transfer functions.
Is the machine suitable for large production orders?
The equipment is designed for repetitive batch production and is particularly relevant to applications requiring thousands of identical components.
What information is required for machine selection?
Customers should provide component drawings, material specifications, strip thickness, coil dimensions and expected production quantities.
The Fully Automatic Irregular Copper Strip Punching Machine provides an integrated solution for automatic feeding, customized punching, scrap removal and finished-product handling. Its servo-controlled feeding system, programmable operation and automatic conveyor support make it suitable for manufacturers producing thin, irregularly shaped copper components for electrical and industrial applications.
Final equipment configuration should be determined through drawing review, tooling evaluation and sample punching tests.
Send your inquiry directly to us